HAWK Plus
The Hawk Plus is a single seater based on the two seat Hawk Arrow. While the single seat Hawk Classic and Arrow models have large baggage areas behind the seat, it can be difficult to place large bulky items back there. The Plus was designed to accommodate the requests of customers needing a larger cargo capacity. The Hawk Plus uses the same fuselage at the two seat Arrow, but with only the front seat. Wing tanks are standard on the Plus, so the rear area is completely unobstructed for hauling cargo, additional fuel tanks, or a passenger in a jump seat. We have put four large filled duffel bags on board and still had room for the small stuff. With the larger engine options offered, up to 250 lbs. can be carried in the rear baggage area.
Another feature of the Hawk Plus is the wing spars, which are stronger than those found on standard single seat models. They are 2 1/4" dia. X .083 (instead of .049) wall thickness to provide the same load factors as the single place models. The Hawk Plus also has the semi symmetrical wing, streamline struts, reinforced boom, wing tanks, fiberglass nose cone, folding tail, and curved overhead and windshield as standard equipment.
Specifications
Empty Weight 350 lbs
Gross Weight 800 lbs
Wing Span 29'
Wing Area 135 sq. ft
Engine Size 40-65 hp
Rate of Climb 800-1,100 fpm
Cruise Speed 60-80 mph
Stall Speed 35-40 mph
Vne 100 mph
Assembly Time 250 hrs
BASIC KIT INCLUDES AS STANDARD EQUIPMENT:
AIRFRAME KIT
- 3 Position Wing Flaps (not flaperons)
- Reinforced boom tube
- Full fuselage pilot surround (roll cage)
- Heavy duty wing frames, 2 ¼” front spar, 1 ¾” rear spar (factory pre-built)
- Seat belt with shoulder harness
- All control surfaces (factory pre-built) (flaps, ailerons, rudder, vertical stab,horizontal stab, & elevator)
- Heavy duty fiberglass landing gear legs
- Your choice – tail dragger with steerable tail wheel or tricycle/steerable nosewheel
- Large rear doors to accommodate bulky items transported in cargo area
- Streamlined struts – aluminum
- Streamlined landing gear fairings
- Curved overhead carry through increases head room by 3”
- Folding tailLower rib battens (for semi-symmetrical wing)
- Fiberglass nose cone - adds 3-4 mph to top speed, provides streamlined appearance
- Rough terrain wheels - 16" x 6.5" x 6"
- 2 five gallon wing tanks
- Anodized tubing
$11,495.00 U.S.D.
COVERING PACKAGE
Includes 3.8 oz. stabilized dacron covers. Dacron covers include all control surfaces which are pre-sewn and ready to install, zipper doors, and full fuselage enclosure.
Dacron Covers/OptionsThere is no extra charge for ordering Dacron covers with solid colors. You can mix the solid colors as much as you like. (i.e. red wings, yellow ailerons, yellow flaps, black fuselage, etc.). Stripes and special logos are optional, and a layout diagram needs to be submitted for a quote. Color samples and layout diagrams are available upon request.
Click here to see available cloth colors.
$3,331.00 U.S.D.
ENGINE PACKAGES
(Engine packages offered below are for combining with the above kit and covering packages only.)
Due to the varying rate of the Euro against the US Dollar, all Engine packages will be priced at the time written order is received. Please call or email us for pricing and availability.
Rotax 503 (50 h.p.) Dual Carb Engine Package:
Includes engine, IVO two blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets.
Rotax 582 (65 h.p.) Engine Package:
Includes engine, radiator package, IVO three blade prop, electric start, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets.
Rotax 912 4 Stroke Package (80 HP)
Includes engine, electric start, IVO three blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware, and brackets.
OPTIONS FOR SINGLE PLACE “PLUS” MODEL
All pricing in USD
- Trim Tab (in cockpit adjustable) $115.00
- Brakes, mechanical $195.00
- Brakes, hydraulic O’Brien w/stick mounted
master cylinder $495.00
- Brakes, hydraulic Hager w/stick mounted
master cylinder, includes Hager wheels $695.00
- Wing and Tail Folding option $460.00
- Folding Tail only $230.00
- Hard Doors for Single Place (2 doors)
applies only to Dacron orders $210.00
- Map case in doors for storing sectionals, etc.
(per door – cloth door only) $47.00
- Tinted Lexan Windows $175.00
- Wing Window Tinted $130.00
Parachute Systems for Single Place Models
(Includes Mounting Package)
- BRS 600 (600 lbs.) Softpack Call
- BRS 800 (800 lbs.) Softpack Call
- BRS 1050 (1050 lbs.) Softpack Call
- BRS 1050 (1050 lbs.) Canister Call
- BRS 1050 (1050 lbs.) VLS Call
- Freight for parachute systems Call
Special Options
- Fast-build kit, requires only 150 hours to complete
(for first time builder) $4,500.00
- Special crating for fast-build kit Call
- Amphibious and standard Float Systems Call
- Wing tank kit, 10 gal total (5 gal per side) Includes
2 tanks, hoses, fittings,sump tank, mounting
brackets, straps, etc. $495.00
- Wheel pants (pants only), Set of 3 $395.00
- Wheel pants (pants only), Set of 2 $295.00
- Wheel pants mounting kit $50.00
*All kits are shipped via truck line and are subject to a $600 crating charge per kit.
ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE CONTACT FOR QUOTE